Case Study: DensDeck® Prime Roof Boards Specified for Project Pelican

19 November 2026

Aerial shot of data centre

DensDeck® Prime Roof Board was specified as a recovery board solution on Project Pelican, the refurbishment of two flat roofs totalling 50,000m2 on mission-critical buildings for an international microprocessor manufacturer in Malaysia.

The existing roof coverings had reached the end of their service life, and the buildings needed to remain operational throughout the installation while meeting international insurance standards.

Project Pelican

Contractors mechanically fixed DensDeck Prime Roof Board as a recovery board over the existing roof structure, with a new single-ply membrane installed directly on top.

In Malaysia’s high-humidity, monsoon-prone climate, the board’s dimensional stability and mould resistance (under ASTM D3273) outperformed the locally produced cement composite boards under consideration, making DensDeck Prime Roof Board the specification standard for the project.

Cutaway of roof build up

Recovery Board

“The local climate presented unique challenges for the roof system refurbishments on this project,” Andy Law, Head of Building Systems at Sika in Malaysia, said. “The recovery board solution had to meet those challenges and fulfill the client’s requirement for FM Approval. DensDeck Prime Roof Boards showed they could do both and were the preferred choice of recovery board.”

As a recovery board, DensDeck Prime Roof Board is installed directly over existing insulation and waterproofing layers in refurbishment projects, helping to create a modular, rigid surface to build a new roof system on without removing and rebuilding the existing structure underneath.

Fire Classification

DensDeck Prime Roof Board holds an A1 reaction to fire classification and is classified as non-combustible, both in accordance with EN 13501-1. The board is included in over 200,000 FM-approved roof assemblies (tested to FM 4470).

In testing conducted by ZAG Slovenia, thermocouple readings showed significantly lower heat transfer through the roof system when DensDeck Prime Roof Board was included, indicating improved protection of the insulation layer.

Load Testing

The board has a compressive strength of 6,205 kPa and an independent point-load testing to EN 12430 has shown that its rigid core can help spread load from across the insulation layer, reducing the risk of compression damage over time from foot traffic or BAPV panels.

Flat roof with snow on itIt is lightweight compared with cementitious alternatives, scores 10 out of 10 for mould resistance under ASTM D3273 and carries an H1 water absorption classification, which helps support assemblies in humid or high-rainfall areas.

In independent acoustic testing, a steel deck and insulation roof with no cover board achieved a sound reduction rating of 23 dB Rw. With DensDeck Prime Roof Board added, the same type of assembly achieved 29-31 dB Rw, depending on board thickness.

Versatile

DensDeck Prime Roof Board is a versatile addition to a variety of commercial roof systems. As a cover board, it helps to provide a resilient layer to the roofing system. When used as a substrate board, it can help provide acoustic support and fire resistance. As a parapet board, it can be used to support the Vapour Control Layer (VCL) and waterproofing layers. Over existing systems, as a recovery board, it can be mechanically fixed to the structure, offering a resilient layer onto which additional thermal insulation and new waterproofing layers can be added.

>>Read more about DensDeck Prime Roof Board in Featured Solutions

Share article

Check out the latest issue

127 November – December 2026

Sign Up to
Roofing Today

Stay up to date with all of the latest news from Roofing Today by signing up to our weekly Bulletins…