The Sliding Solution that Lets the Light In, and the Smoke Out!

« View all news stories

Share this story:
The Sliding Solution that Lets the Light In, and the Smoke Out!

Bilco have introduced a stylish new product to their range of smoke vents and access products. Combining the benefits of a skylight with the performance and certification (CE marked) of a natural smoke and heat and exhaust ventilator, the SKY-1M is an ideal solution for situations where a smoke vent is required, but the project also calls for allowing natural light into a stairwell.

With an internal dimension of 1000mm x 1500mm, the SKY-1M is a fully tested CE marked product giving a 1m² clear vent area.

Manufactured with a white PPC finish for all PVC and metal profiles, the SKY-1M has a sliding cover which opens to the fire open position within 60 seconds and comprises a double layer thermoformed polycarbonate dome (tested for impact resistance to EN 1873 Class SB1200) assembled on a fully welded PVC frame in which a double layer security glass (classified 2(B02 according to EN 12600:2004) has been inserted.

The cover also features an extruded EPDM rubber gasket to ensure a continuous seal when compressed in the front and in the back of the vent. The curb is 250mm in height and is manufactured in a double layer (internal and external) polyester resin reinforced with fibreglass and is also supplied with a 150mm flange with pre-drilled 9mm holes for easy installation to the roof deck/upstand.

The vent is operated through a 24V DC battery backed control system that opens the vent within 60 seconds using a single rotating actuator mounted on a sliding carriage. In terms of performance, the SKY-1M has a U-value of 1.02 W/m²K and is fully weathertight.

In addition to offering a stylish solution to smoke ventilation and natural light requirements, the SKY-1M can also be used in a situation where a powered access solution is required. If it is being used as a smoke vent, the product can use a fixed vertical ladder to provide occasional access to the roof area for maintenance etc.

For use as a powered access hatch only, the product is available as SKY-ACCESS which is capable of being used with a variety of ladder access including companionway or retractable ladders. The standard size for the new product is 1000mm x 1500mm internal and 1300mm x 1800mm external, however if required, we can manufacture special sizes to meet your project needs.

Call Bilco on 01284 701696 or check out the website here.
 

Enquire about this product

Subscribe

Subscribe today »

Sign up for our newsletter

Enter your email address below to sign up!

Follow Roofing Today on Twitter Follow Roofing Today on Linked In